PL068-P AIM-TTI Aim-TTi PL068-P Bench Power Supply With UKAS Calibration, 1 Output 0 → 6V 0 → 8A 94W
| |
|
| Producent | AIM-TTI | | Part Number | PL068-P (PL068P) |
| Specifications | Aim-TTi PL068-P Bench Power Supply With UKAS Calibration, 1 Output 0 → 6V 0 → 8A 94W |
| Unit Price | 753,08 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | CalibratedUKAS Maximum Temperature+40°C Minimum Temperature+5°C Number of Displays2 Number of Outputs1 Output Connector4 mm Safety Socket Output Current0 → 8A Output Voltage0 → 6V Power Rating94W Supply Voltage115 V ac, 230 V ac TypeDigital Product Details New PL & New PL-P Series Single, Dual and Triple Output PSUs Single, dual or triple output modelsModels from 6V/8A up to 60V/1.5ALinear regulation - for the best performanceUltra-compact design - uses up less spaceTrue Analog controls - for ease of useS-Lock function - instantly lock settingsV-Span function - customise the voltage rangeLow current range and current meter averagingDC output switches and 'view limits' buttonSelectable remote sense terminalsIndependent, Isolated Tracking, Ratio Tracking and True Parallel modes on dual & triple modelsHigh current low voltage output on triple output model Output PL Series Operating modes Constant voltage or constant current with automatic crossover Load regulation Line regulation Output noise Typically Voltage adjustment By analogue coarse and fine controls Current adjustment By analogue logarithmic control Low current range 500mA range giving greater setting and metering resolution Meter averaging Switchable averaging of current meter reading to reduce fluctuations Setting stability With S-Lock function engaged, settings are stable to better than 1 digit Voltage limits With V-Span function enabled, both end points of the coarse voltage control pot can be set to any values to limit the output voltage range Meter accuracies Voltage 0.1% ± 1digit; current 0.3% ± 1 digit Meter resolutions Voltage 10mV; current 1mA or 0.1mA DC output switch Sets voltage to zero when off (for dual output PSU, additional Both On and Both Off switches allow synchronous switching of the two outputs) Remote sensing Switch selectable as local or remote; remote connection via front terminals PL-P Series Digital Interfaces All digital interfaces are fully isolated from the output RS-232 Standard RS232/RS423 interface using 9 pin D connector USB Standard USB hardware connection. Supplied with device driver for Win-98 or above (including Vista). Operates as a virtual COM port. Ethernet (LAN) Standard 10/100 base-T hardware connection for connection to Local Area Network or direct connection to a single PC. Supplied with IVI driver. LXI Compliance LAN interface is compliant with LXI-C Note RM450 rack mount kit 493-522 caters for up to four single output units or two dual output units or any combination. Total height 4U includes ventilation spaces above and below, together with blanking panels for unused positions. Approvals EN61010-01 (Safety); EN61326 (EMC) Supplied with user manual and mains lead Aim-TTi - Linear Regulation |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
