|
| Producent | AIM-TTI | | Part Number | TG1000 (TG1000) |
| Specifications | Aim-TTi TG1000 Function Generator 10MHz |
| Unit Price | 634,07 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Digital Amplitude and OffsetYes Digital FrequencyYes Dimensions235 x 260 x 88mm FM ModulationYes Height88mm Input Impedance10 kΩ Internal and External Amplitude ModulationYes Internal Linear and Log SweepYes Length235mm Maximum Frequency Range Sinewave10MHz Maximum Frequency Range Square Pulse and Arbitrary Waveform10MHz Maximum Frequency Range Triangle/Saw1MHz Maximum Operating Temperature+40°C Minimum Frequency Range Sinewave1MHz Minimum Frequency Range Square Pulse and Arbitrary Waveform1 mHz Minimum Frequency Range Triangle/Saw1MHz Minimum Operating Temperature+5°C Model Number pTG1000 Output Amplitude20V Pk-Pk Output Impedance50 Ω, 600 Ω Plug TypeType C - European Plug, Type G - British 3-pin Time Base Accuracy±10ppm Variable SweepYes Weight2kg Width260mm Product Details Aim-TTi TG1000 & TG2000 DDS Function Generators, 10MHz & 20MHz The TG1000/2000 offers a high quality direct digital synthesis (DDS) function generator at a significantly lower price. DDS generates waveforms using a phase accumulator, look-up table and DAC. The accuracy/stability of the resulting waveform is related to that of the crystal master clock. When correctly engineered, the DDS generator offers not only exceptional accuracy and stability but also high spectral purity, low phase noise and excellent frequency agility. The TG2000 includes RS-232 and USB interfaces for remote control of all instrument functions and for remotely storing instrument set-ups. 6 digits or 1mHz setting resolution1ppm stability and better than 10ppm absolute accuracy for one yearSine, square, triangle, positive pulse and negative pulse waveformsInternal sweep, linear or logarithmic, phase continuous, 0.1Hz to 20MHz Modulations modes of sweep, gated, AM, FSK and tone switching - built-in trigger generator5mV to 20V pk-pk output from 50Ω or 600Ω; plus multi-function auxiliary outputStorage for up to nine complete instrument set-ups in non-volatile memory Sine Wave Frequency Range 1mHz to 10MHz/20MHz; resolution 6 digits or 1mHz Distortion Square Wave and Positive/Negative Pulse Frequency Range 1mHz to 10MHz/20MHz; resolution 6 digits or 1mHz Rise & Fall Times Symmetry Variable 20 % to 80 % in 1 % steps Triangle Wave Frequency RangeLinearity Error 1mHz to 1MHz; resolution 6 digits or 1mHz Output Level Sine/Square/Triangle 5mV to 20V pk-pk from 50Ω/600Ω source (switchable) Pulse 2.5mV to 10V pk-pk from 50Ω/600Ω source, positive or negative pulses with respect to DC offset baseline Accuracy & Flatness ± 3% ± 1mV at 1kHz into 50Ω/600Ω. Flatness ± 0.2dB to 500kHz; ± 1dB to 20MHz DC Offset ± 2.5mV to ± 10V from 50Ω/600Ω source Internal Sweep Sweep Width 0.1Hz to 20MHz; single range; lin or log; phase continuous Sweep Time 20ms to 999s (3 digit resolution); triggered or continuous Trigger and Marker Trigger from front panel or remote interface; variable marker output Modulations Modulation Modes External AM; Int/Ext Gate; Int/Ext FSK; Int/Ext Tone Trigger Generation Trigger signals can be generated from an internal trigger generator, a front panel key, an external input, or a remote interface Outputs and Inputs Outputs Main - 50Ω/600Ω. switchable, Aux - Multifunction logic level output Inputs VCA In - amplitude modulation I/P; External Trigger Gate I/P Interfaces RS-232 Variable baud rate, 19.200 max., 9 pin D connector USB Conforming with USB1.1 General Power Requirement 220-240V, 110-120V or 110V ±10 % 50/60Hz; Installation Category II Size and Weight 260 x 88 x 235mm. 2.0kg Standards Complies with EN61010-1 and EN61326 Supplied with Mains lead and full instructions Function Generators: Digital Synthesis |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
