TG315 AIM-TTI Aim-TTi TG315 Function Generator 3MHz
| |
|
| Producent | AIM-TTI | | Part Number | TG315 (TG315) |
| Specifications | Aim-TTi TG315 Function Generator 3MHz |
| Unit Price | 285,15 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Attenuation0 dB, -20 dB, -40 dB, -60 dB CMOS Output Level0 → 5V Digital Amplitude and OffsetYes Digital FrequencyYes Dimensions235 x 260 x 88mm Height88mm Input Impedance10 kΩ Length235mm Maximum Frequency Range Sinewave3MHz Maximum Frequency Range Square Pulse and Arbitrary Waveform3MHz Maximum Frequency Range Triangle/Saw3MHz Maximum Operating Temperature+40°C Minimum Frequency Range Sinewave0.03Hz Minimum Frequency Range Square Pulse and Arbitrary Waveform0.03 Hz Minimum Frequency Range Triangle/Saw0.03Hz Minimum Operating Temperature+5°C Model Number pTG315 Output Amplitude20V Pk-Pk Output Impedance50 Ω, 600 Ω Plug TypeType C - European Plug, Type G - British 3-pin Time Base Accuracy±10ppm TTL Output Level0 → 5V Weight1.9kg Width260mm Product Details Aim-TTi TG310 & TG315 3MHz Function Generator with Dual Digital Displays The TG315 is a low-cost 3MHz function generator which incorporates an LCD display that gives a simultaneous readout of frequency and amplitude (or dc offset). Wide frequency range is matched by very high waveform quality at all frequencies and amplitudes. The digital display provides fast update even at low frequencies. The TG310 is a simplified version of the TG315, having a calibrated frequency dial and no LCD display. Simultaneous digital display of frequency and levelHigh accuracy frequency readout with fast update2mV to 20V pk-pk output from 50Ω or 600ΩLevel display compensated for attenuator setting1000:1 frequency change by vernier or external sweep inputVariable symmetry at constant frequencyDisplay annunciators including clipping indicator Frequency Frequency Range 0.03Hz to 3MHz in 7 overlapping decade ranges with vernier control Dial Control Range 1000:1 on each range External Sweep 1000:1 linearly with applied voltage Frequency Display Auto-ranging reciprocal measurement giving 4 digit resolution. Accuracy ±1 digit down to 0.2Hz, ±1% below 0.2Hz Sweep External Sweep Linear control by external voltage, 1000:1 maximum on each range Sine 50Ω and 600Ω via separate sockets Distortion Less than 0.5% on 300Hz, 3kHz and 30kHz ranges; all harmonics> 25dB below fundamental on 3MHz range Amplitude Flatness ±0.2dB to 200kHz; ±2dB to 3MHz Triangle Better than 99% to 200kHz Squarewave 25dB down on 2M range Rise and Fall Times Mark-Space Ratio 1:1 ±1% to 100kHz D.C ±10V (0dB) or ±1V (-20dB attenuator) Range ±10V (unterminated) Symmetry 50Ω and 600Ω via separate sockets Symmetry Range Variable typically between 1:9 and 9:1 (on top decade of each range), frequency divided by 10 when Symmetry is selected Outputs Output Impedance 50Ω, alternative 600Ω output available Amplitude 2mV to 20V peak-peak (open circuit) in four ranges with 20dB control within each DC Offset Range ±10V (Offset plus signal limited to ±10V), Accuracy ±(2%+1 digit) Amplitude Display 3 digit display showing pk-pk or rms amplitude or dc offset, compensated for attenuator setting. Accuracy ±5% of range Aux Output 0 to 5V TTL/CMOS levels (2TTL loads) General Power Requirement 220V or 230Vac ±10%, 50/60Hz. Installation Category II. Safety and EMC Complies with EN61010-1 and EN61326 Aim-TTi TG300 Series |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
