|
| Producent | AIM-TTI | | Part Number | TGA1242 (TGA1242) |
| Specifications | Aim-TTi TGA1242 Function Generator 16MHz GPIB, RS232 With RS Calibration |
| Unit Price | 3434,18 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | CalibratedRSCAL Digital Amplitude and OffsetYes Digital FrequencyYes Dimensions335 x 350 x 130mm Height130mm Input Impedance10 kΩ Interface TypeGPIB, RS232 Internal and External Amplitude ModulationYes Internal Linear and Log SweepYes Length335mm Maximum Frequency Range Sinewave16MHz Maximum Frequency Range Square Pulse and Arbitrary Waveform16MHz Maximum Frequency Range Triangle/Saw100kHz Maximum Operating Temperature+40°C Minimum Frequency Range Sinewave0.1MHz Minimum Frequency Range Square Pulse and Arbitrary Waveform1 MHz Minimum Frequency Range Triangle/Saw0.1MHz Minimum Operating Temperature+5°C Model Number pTGA1242 Output Amplitude20V Pk-Pk Output Impedance50 Ω, 600 Ω Plug TypeType C - European Plug, Type G - British 3-pin Time Base Accuracy±10ppm Variable SweepYes Weight7.1kg Width350mm Product Details TGA 1200 Series Up to 40MS/s sampling frequency64k point horizontal resolution256k point non-volatile waveform memoryStorage for 100 waveforms and 9 set-upsTrue variable clock architecture eliminates jitterExtensive waveform creation and editing by front controls or Windows based softwareIntegral RS-232 and GPIB (IEEE-488) interfaces for full remote control and waveform downloadGenerators can be locked together where more channels are requiredSine and square waves up to 16Mz12 bit vertical resolutionWaveform linking, looping and sequencingInter-channel triggering,summing and phase controlDDS mode standard functions and sweep modesDimensions (mm): H 130, D 335, W 212(TGA1241) 350 (TGA1242/44)Weights (kg): 4.1 (TGA1241) 7.2 (TGA1242/44) STANDARD WAVEFORMS dc Offset: ±10V Sine, Cosine, Haversine, Havercosine Rise and fall times: Range: 0.1mHz to 16MHz Resolution: 3 digit or 1mV(Amplitude & dc Offset) Resolution: 0.1mHz to 7 digits Sync Out Square Multifunction output user definable or automatically selected to be any of the following: Waveform Sync, Position Markers, Burst Done, Sequence Sync or Trigger signal. Range: 1mHz to 16MHz Cursor/Marker Out Resolution: 1mHz (4 digits) Adjustable output pulse for use as a marker in sweep mode or as a cursor in arbitrary waveform editing mode. Triangle, Ramps & Sin(x)/x INPUTS Range: 0.1mHz to 100kHz Trig In, Modulation In, Sum In, Hold, Reference In/Out Resolution: 0.1mHz or 7 digits MODULATION MODES Pulse & Pulse Train Sweep Repetition Range: 100ns to 100s Linear or logarithmetic sweep, is provided for both standard and arbitrary waveforms Pulse Resolution: 4 digit Frequency span from 1mHz to 16MHz in one range, phase continuous, with independent setting of start and stop frequency. Variable sweep time between 30ms and 999 seconds and variable sweep marker. The sweep may be free to run or triggered manually from the keyboard or externally from the trigger input or remote interface. Pulse Delay: -99.99s to 99.99s Amplitude Modulation Pulse Width: 25ns to 99.99s AM or SCM modulation using another channel or the external signal input Pulse trains of up to 10 pulses may be specified, each pulse having independently defined width, delay and level Triggered Burst, Gated and Tone Switching ARBITRARY WAVEFORMS Standard and arbitrary waveforms can be used in Triggered Burst, Gated or Tone Switching Modes. The trigger source can be internal from the keyboard trigger generator, or external from TRIG IN in remote interface. In Triggered Burst, each active edge of the trigger signal will produce one burst of the waveform. Burst length is 1 to 1048575. Up to 100 user defined waveforms may be stored For tone switching, a list of up to 16 frequencies from 1mHz to 16MHz can be generated with instantaneous switching between them. Switching mode can be Gate, Triggered or FSK. Waveform Memory: 64k points per channel (4 to 64k points) Trigger Generator Vertical Resolution: 12 bits (4096 points max) Internal source 0.005Hz to 100kHZ square wave adjustable in 10s steps. 3 digit resolution. Available for external use from any SYNC OUT socket. Sample Clock Range: 0.1Hz to 40MHz (4 digit resolution) General Waveform Sequencing Display: 20 character x 4 row alphaumeric LCD Up to 16 waveforms may be linkedEach waveform can have a loop count of up to 32768A sequence of waveforms can be looped up to 1048575 times or run continuously Data entry: Keypad and/or Spin wheel Output Filter Power: 230V, 115V or 110V±14% 50/60Hz 100VA max.Installation Catergory II Stable between 16MHz Elliptic, 10MHz Elliptic, 10MHz Bessel or none Operating Temperature: +5°C to +40°C, 20-80% RH Waveform Editing Waveform creation and editing tools are built in enabling point values, line drawing and waveform insertion and scaling to be done directly with the instrument OUTPUTS Main Output Amplitude: 5mV to 20V pk-pk emf from 50Ω Supplied with Mains lead, waveform editing/creation software and Instruction leaflet. Arbitrary Waveform Generators |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
