|
| Producent | AIM-TTI | | Part Number | CPX400D (CPX400D) |
| Specifications | Aim-TTi CPX400D Bench Power Supply, 2 Output 0 → 60V 0 → 20A 840W |
| Unit Price | 1104,00 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Maximum Temperature+40°C Minimum Temperature+5°C Number of Displays4 Number of Outputs2 Output ConnectorBinding Post Terminal Output Current0 → 20A Output Voltage0 → 60V Power Rating840W Supply Voltage110 → 240V TypeDigital Product Details Dual Output, 60V, 20A, 840 Watts - PowerFlex CPX400D & CPX400DP The CPX400D and CPX400DP are dual output PSUs using PowerFlex regulation which enables higher currents to be generated at lower voltages within a power envelope. They feature smart analogue controls with settings lock, and isolated voltage tracking for easy series or parallel wiring. The CPX400DP includes a full range of digital remote control interfaces and duplicate output terminals at the rear. Dual isolated outputs, independent or trackingPowerFlex regulation with 840 watts of total powerUp to 60V and up to 20A within a 420W power envelope on each outputIsolated tracking provides up to 120V in series or up to 40A in parallelTrue analogue controls with digital enhancementsS-Lock function locks voltage and current settings at the touch of a buttonRange control buttons offers fixed range or PowerFlex operationVariable over-voltage protection (OVP) and over-current protection (OCP)Synchronous or independent switching of the outputsCompact 3U half-rack casing for bench or rack useDuplicate output and sense terminals at rear (CPX400DP only)Full range of bus interfaces, RS232, USB, LAN (LXI compliant) and GPIB (CPX400DP only) Outputs Number of Outputs 2 Voltage and Current Each output can be set as 60V/7A or 20V/20A or PowerFlex (60V max./ 20A max., 420 watts max.) or Custom Operating modes Constant voltage or constant current with automatic crossover Load & Line regulation Output noise Typically Voltage adjustment By analogue coarse and fine controls, or bus interfaces Current adjustment By analogue logarithmic control, or bus interfaces Setting stability (Local) With S-Lock function engaged, settings are stable to better than 1 digit Remote Setting Accuracy Voltage: ± (0.05% +10mV), Current: ± (0.3% +5mA) Setting Resolution Voltage: 1mV; Current: 1mA (Remote) Meter accuracies Voltage ±(0.1% + 2 digits), Current ±(0.3% + 2 digits) Meter resolutions Voltage 10mV; Current 10mA Tracking Modes Outputs are always electrically isolated and can be independent or tracking Tracking Accuracy Slave voltage = ± (0.1% of Master voltage setting + 10mV) OVP and OCP Local setting of OVP from front panel; remote setting of OVP and OCP DC output switches Set voltage to zero when off Remote sensing Switch selectable as local or remote Output Terminals Safety binding posts at front, tag strip terminals at rear on CPX400DP Interfaces (CPX400DP) All digital interfaces are fully isolated from the output RS-232 Standard RS232/RS423 interface using 9 pin D connector USB Standard USB hardware connection. Supplied with device driver for Windows OS inc. Windows 7. Operates as a virtual COM port Ethernet (LAN) Standard 10/100 base-T hardware connection for connection to Local Area Network or direct connection to a single PC. Supplied with IVI driver LXI Compliance LAN interface is compliant with LXI-C GPIB Complies with IEEE488.1 and IEEE488.2 General Supply Voltage AC Input: 110 to 240 volts ±10% 50/60Hz. Installation Category II Size and weight 210 x 130 x 350mm (WxHxD), 7kg Approvals Complies with EN 61010-1 (Safety) and EN61326 (EMC) Options Rack Mount Compatible with TTi power supply rack kit type RM460 Note The higher value CPX400DP includes GPIB, RS-232, USB and LAN interfaces with LXI class C compliance Standards EN 61010-1, EN61326 Supplied with User manual, mains lead, CD containing IVI driver and other software Aim-TTi - PowerFlex Regulated |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
