440F-E000029RS Allen Bradley Guardmaster 0110N Safety Edge Profile, Protected Area 2m, RHT Wire Lead
| |
|
| Producent | Allen Bradley Guardmaster | | Part Number | 440F-E000029RS (440FE000029RS) |
| Specifications | 0110N Safety Edge Profile, Protected Area 2m, RHT Wire Lead |
| Unit Price | 355,55 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Length24.5mm MaterialEPDM, NBR/CR Profile0110N Protected Area2m RangeSafedge Series440-F Terminal TypeRHT Wire Lead Width28.5mm Product Details Safedge Profiles The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.A range of accessories for end termination and 90° active corner joints are also available. 2 different profile designsConductive rubber technologyAvailable in 1m, 1.5m or 2m lengthsAluminium mounting railThe system has a bend radius of 200mmRubber boot optionalActive cornersIP65 protection Note These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive. Safety Edge |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
