440G-T27129 Allen Bradley Guardmaster 440G Solenoid Interlock Switch, Power to Lock, 230 V ac
| |
|
| Producent | Allen Bradley Guardmaster | | Part Number | 440G-T27129 (440GT27129) |
| Specifications | 440G Solenoid Interlock Switch, Power to Lock, 230 V ac |
| Unit Price | 197,16 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Auxiliary ContactsNO Conduit EntryM20 Depth33mm Housing MaterialGlass Filled PBT IP RatingIP69K Length126mm Maximum AC Voltage230V Pole ConfigurationDP (Safety), DP (Solenoid), SP (Auxiliary) Power Consumption7 W Power to Lock / UnlockSolenoid Energised to Lock RangeTLS-GD2 Safety Contacts2NC Series440G Supply Voltage230 V ac Width86mm Product Details TLS-GD2 Solenoid Interlock Switch, for Demanding Applications The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot.The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard.The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs.The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped.A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating of IP69K making it suitable for harsh wash down applications as found in the food and beverage, pharmaceutical, solar and semiconductor industries.TLS-3 specially designed to eliminate the problems of lockout when interfacing solenoid locking switches into dual channel safety relays.Power-to-release or power-to-lockHigh locking force £2000 N (450 lb)Five contacts: 2 NC & 1 NO for door position monitoring 1 NC & 1 NO or 2 NC for lock monitoringRotatable head: 4 possible actuator entry positionsLid mounted status indication3 manual release points with security screws for use in the event of an emergencyIP69K, suitable for high pressure, high temperature, wash downKey release lids available for unlocking the locking mechanism in emergencies Note Actuator is not supplied and must be ordered separately. Standards Conforms to EN 1088 & EN 60947-5-1. Solenoid Interlock Switch Warning With the TLS-2 GD2 “power to lock” style, provisions may be required to ensure that a dangerous situation can not result from open circuit faults or power cuts. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
