126284 Burkert Burkert Solenoid Valve 126284, 2 port , NC, 24 V dc, 3/4in
| |
|
| Producent | Burkert | | Part Number | 126284 (126284) |
| Specifications | Burkert Solenoid Valve 126284, 2 port , NC, 24 V dc, 3/4in |
| Unit Price | 155,52 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Body MaterialBrass Connection3/4 in G Female Connection GenderFemale Connection Size3/4in Default Valve PositionNC Flow Factor Kv8.3m³/h Maximum Closing Time4s Maximum Opening Time4s Maximum Operating Temperature+55°C Maximum Working Pressure10bar Number of Ports2 OperationPilot Orifice Diameter20mm Series6213 Suitable ApplicationsHydraulic Oil, Neutral Liquid, Oil without Additives, Water Supply Voltage24 V dc Thread Standard or Connection TypeG Type2/2 Product Details Two-way General Purpose Solenoid Valves, Type 6213 The valve can be mounted in any position, but mounting with coil uppermost is preferred. Normally closed solenoid valves suitable for use with oil, fat without additives, water and neutral fluidsBSP parallel ports suitable for use with compression fittingsEpoxy encapsulated coilsThree-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments0-10 bar pressure rangeNominal coil power 8WMaximum operating temperature 55°CPower consumption 21VA (Inrush, AC); 12 VA/8 W (Constant, AC); 8W (DC)Protection to IP65 Two Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
