134434 Burkert Burkert Solenoid Valve 134434, 2 port , NC, 24 V dc, 3/4in
| |
|
| Producent | Burkert | | Part Number | 134434 (134434) |
| Specifications | Burkert Solenoid Valve 134434, 2 port , NC, 24 V dc, 3/4in |
| Unit Price | 218,81 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Body MaterialBrass Connection3/4 in G Female Connection GenderFemale Connection Size3/4in Default Valve PositionNC Flow Factor Kv6.5m³/h Maximum Closing Time4s Maximum Opening Time0.8s Maximum Operating Temperature+55°C Maximum Working Pressure10bar Minimum Operating Temperature0°C Number of Ports2 OperationPilot Orifice Diameter20mm Series5282 Servo AssistYes Suitable ApplicationsNeutral Media Supply Voltage24 V dc Thread Standard or Connection TypeG Type2/2 Product Details Two-Way General Purpose Solenoid Valves, Type 5282 The Type 5282 valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of challenging applications. Less sensitive to dirty fluids and corrosion resistant due to separating diaphragmSuitable for use with neutral gases and liquidsLong-life solenoid systemHigh reliabilityOpening and closing times controlled by integrated restrictor screwsLockable manual override as standardNBR seal materialProtection to IP65 Two Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
