138051 Burkert Burkert Solenoid Valve 138051, 2 port , 240 V ac
| |
|
| Producent | Burkert | | Part Number | 138051 (138051) |
| Specifications | Burkert Solenoid Valve 138051, 2 port , 240 V ac |
| Unit Price | 61,13 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Number of Ports2 Supply Voltage240 V ac Type2/2 Product Details Miniature solenoid valve These solenoid valves, which are closed when not in use, are suitable for use in the following media:Oils and greases without additivesWater and neutral fluidsAir and neutral gasesThese direct acting two-way solenoid valves with brass housing have M5 connections.The M5 connections are suitable for compression screw jointsThe three-pole DIN-plug with protection rating IP65 can be pivoted through 180 °Coil is encapsulated in epoxyFluid temperature range -10 °C → +90 °CValves can be mounted in any position, though mounting with coil facing up is preferred Supply voltage Nominal voltage ±10 % Power consumption AC power up 9 VA Duration 6 VA / 4 W DC 4 W Operating frequency 1000 cycles/minute Viscosity 21 mm2/s Max. Fluid temperature: +90 °C Pressure range 0 → 21 bar (AC) 0 → 12 bar (DC) Air flow 48 l/min Valve opening 1.2 mm Ambient temperature: +55 °C Sealing material NBR 3 Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
