221926 Burkert Burkert Solenoid Valve 221926, 2 port , NO, 24 V dc, 1/2in
| |
|
| Producent | Burkert | | Part Number | 221926 (221926) |
| Specifications | Burkert Solenoid Valve 221926, 2 port , NO, 24 V dc, 1/2in |
| Unit Price | 114,03 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Body MaterialBrass Connection1/2 in G Connection GenderFemale Connection Size1/2in Default Valve PositionNO Flow Factor Kv3.8m³/h Maximum Closing Time0.1 → 4s Maximum Operating Temperature+80°C Maximum Working Pressure16bar Minimum Operating Temperature-10°C Number of Ports2 Operating Temperature Range-10 → +80 °C OperationSolenoid/Air Pilot Orifice Diameter13mm Series6281 EV Standard Servo AssistYes Suitable ApplicationsCompressed Air, Water Supply Voltage24 V dc Thread Standard or Connection TypeG Type2/2 Product Details DS6281-EV 2/2 Solenoid Valve - Brass Bodied A 2 way servo assisted solenoid valve suitable for use with neutral fluids such as compressed air and water. N/C (Normally Closed) and N/O (Normally Open) versions available with NBR (Nitrile Rubber) or FKM (Fluroelastomer) seals. Usable for a variety of applications including heating and refrigeration, water treatment, compressed air and vacuum systems. 0.1 - 4 second response time (dependant upon pressure)IP65 Rated (with cable protection)Brass bodyQuiet operationWater hammer free designCompact installation lengthNPT / Rc connection ports0.2 - 16 Bar pressure range Two Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
