|
| Producent | Burkert | | Part Number | 424117 (424117) |
| Specifications | Burkert Solenoid Valve 424117, 3 port , NC, 230 V ac, 1/4in |
| Unit Price | 113,45 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Body MaterialBrass Connection1/8 in G Female Connection GenderFemale Connection Size1/4in Default Valve PositionNC Flow Factor Kv0.11m³/h Maximum Closing Time22ms Maximum Opening Time18ms Maximum Operating Temperature+55°C Maximum Working Pressure10bar Minimum Operating Temperature-10°C Number of Ports3 Operating Temperature Range-10 → +55 °C OperationDirect Orifice Diameter2mm Series6014P Suitable ApplicationsCompressed Air, Liquid, Neutral Gas Supply Voltage230 V ac Thread Standard or Connection TypeG Type3/2 Product Details 6014 General Purpose 3 way Solenoid Valve Brass bodied, 3-way normally closed solenoid valves. Coil changed easily with valve in placeTwo female ports and a 1/8 in. male vent portCoil can be locked in four by 90° positions or move free between, as requiredBrass body and FKM high quality seal materialEpoxy encapsulated coilFluid temperature range: -10 to +90°CSuitable for use with water, neutral fluids air natural, gases, oil and fats (without additives)Maximum viscosity: 21mm2/sOperating temperature: –10 to +100°C max.Power consumption: 21VA (a.c. in rush), 12VA/8W (constant) 8W (d.c.) Protection to IP65 with cable plug DIN43650C 3 Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
