| Description | Cisco Catalyst 3650-48FD-L - Switch - Managed - 48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+ - desktop, rack-mountable - PoE+ General Features Full duplex capability, Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Strict Priority Queuing (SPQ), Class of Service (CoS), DiffServ Code Point (DSCP) support Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at Device Type Switch - 48 ports - Managed - stackable Enclosure Type Desktop, rack-mountable - 1U Status Indicators Port transmission speed, port duplex mode, system, active, status, PoE Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI RAM 4 GB Capacity IPv4 routes : 24000 ¦ Virtual interfaces (VLANs) : 255 ¦ Switched virtual interfaces (SVIs) : 1000 Flash Memory 2 GB MAC Address Table Size 32000 entries Routing Protocol Static IP routing Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+ Performance Switching capacity : 176 Gbps ¦ Forwarding performance : 130.95 Mpps Power Over Ethernet (PoE) PoE+ Ports 48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+ Jumbo Frame Support 9198 bytes PoE Budget 775 W Subtype Gigabit Ethernet Expansion / Connectivity Interfaces 48 x 1000Base-T - RJ-45 - PoE+ - 30 W ¦ 1 x USB - Type A ¦ 1 x serial (console) - RJ-45 - management ¦ 1 x management (Gigabit LAN) - RJ-45 - management ¦ 1 x management (mini-USB) - Type B - management ¦ 2 x 1000Base-X - SFP - uplink ¦ 2 x 10GBase-X - SFP+ - uplink Expansion Slots 1 (total) / 1 (free) x Stacking Module Manufacturer Warranty Service & Support Details Limited warranty - replacement - lifetime - response time: next business day ¦ Technical support - phone consulting - 90 days Miscellaneous Compliant Standards CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A Rack Mounting Kit Included MTBF 383,760 hours Power Power Device Internal power supply - hot-plug Voltage Required AC 120/230 V ( 50/60 Hz ) Installed Qty 1 (installed) / 2 (max) Power Provided 1025 Watt Power Redundancy Optional Power Redundancy Scheme 1+1 (with optional power supply) Software / System Requirements Software Included Cisco IOS LAN Base Environmental Parameters Min Operating Temperature -5 °C Max Operating Temperature 45 °C Humidity Range Operating 5 - 96% (non-condensing) Min Storage Temperature -40 °C Max Storage Temperature 70 °C Dimensions & Weight Width 44.5 cm Depth 48.6 cm Height 4.4 cm Weight 7.8 kg |
