|
| Producent | DEDITEC | | Part Number | USB-LOGI-100 (USBLOGI100) |
| Specifications | Deditec USB-LOGI-100 Logic-Analyzer, Logic analyzer Bandwidth voltage:100 MHz |
| Unit Price | 205,11 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | USB-Logic analyser USB-LOGI-100 Technical data Inputs 18 Connection 1x 20 pin Interfaces 1x USB Power supply USB Type USB-LOGI-100 Length 117 mm Height 24 mm Width 79 mm Bandwidth voltage:100 MHz Sampling rate voltage:100 MS/s Memory depth 4 kpts/CH Highlights & details 100 MSamples/sec (up to 100 Samples/Sec)18 channels100 MHz to 100 Hz4096 Samples memory depth/channel1:8 .. 7/8 Pretrigger2 Trigger levelsWindows Software Logi+ Description The USB LOGI 100 Logic Analyzer offers you the option to graphically display timely development of digital signals at the monitor. The data can be scanned on all 18 channels with a maximum speed of 100 MSamples/sec. The software Logi+ that allows simple measurement under Windows is enclosed in delivery.Multiple scanning rates/time response by measuring linesYou can select scanning rate in 2 or 2.5 steps. Thus a scanning rate of 100Hz is also possible. In order to simplify the requested measurements, the red test line and blue test line can be positioned in the course of measurement using both mouse buttons. The top status bar is displayed the time difference between two measured linesTriggeringThe time is determined with trigger condition where your recording starts at logic analyzer. The user can set two trigger specifications on the left side of screen. 0.1 or X (ignore) can be set for each channel. You can select rising edge, falling edge or both edges for edge detections.The trigger specifications are set in such a way that both of them can be performed via a separate menu with numerous links (even interlinked). Then the result can also be counted with a 16 Bit meter. Thus, you can also set the recording to start only after the trigger specification has been met thousand times. Pre-triggerWould you like to know what happens before trigger is released?You can configure the time range with adjustable pre-trigger in the range 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8 which is displayed before the specified trigger release.Zoom, quick positioning of displayOf course, the display is magnified/minimized with zoom in and zoom out. You can directly jump to a trigger point or to one of the two measurement lines by a simply giving a menu command. Thus you can easily reach the desired position with low zoom settings.Save, Load, Print...Other functions such as Saving, Loading, Exporting, Printing lend a finishing touch to the numerous features of Logi+. Features Software with zoom function, SPI/RS232 and CAN Interpreter State/Timing Analysis and open DLL2 trigger levelsUSB 1.1 and 2.0Connection via 20 pin connector Included in delivery LOGI+ Software for Windows® USB cable System requirements USB 2.0 or 1.1 portWindows® 2000, XP, Windows VistaTM, WindowsTM 7Screen resolution of min. 1024 x 768 20-pin Measuring cable not included in scope of supply. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
