50.12.9.024.1000 Finder PCB relays 24 Vdc 8 A 2 change-overs Finder 50.12.9.024.1000 1 pc(s)
| |
|
| Producent | Finder | | Part Number | 50.12.9.024.1000 (501290241000) |
| Specifications | PCB relays 24 Vdc 8 A 2 change-overs Finder 50.12.9.024.1000 1 pc(s) |
| Unit Price | 14,20 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | PCB relays 24 Vdc 8 A 2 change-overs Finder 50.12.9.024.1000 1 pc(s) Technical data AC1 switching capacity: 2000 VA. AC15 switching capacity: 230 AC.Max 500 VA1-phase motor AC3, operation 230 V / AC: 0.37 kWSwitching current DC 1: (30/110/220 V):Max 8 mm (0.65 / 0.2 ")Switching load (5 V/5 mA): Min 300 mWUnderground between coil and contacts (1.2/50 microseconds): 6 kVDC coil operating range: 0.75 - 1.2 Un Category PCB relays Type 50.12.9.024.1000 Type 50.12.9.024.1000 Coil nominal voltage 24 Vdc Min. pick-up voltage 18 Vdc Max. pick-up voltage 28.8 Vdc Control mode monostable, 1 coil R(coil) 750 Ω Contact type 2 change-overs Contact material AgNi Switching voltage (max.) 400 Vac Switching current (max.) 8 A Max. switching capacity 2000 VA Creepage distance (coil/clips) 8 mm Connection Solder pins Electrical lifespan 100 000 Switching cycles Durability 10 million switching cycles Min. temperature -40 °C Max. temperature +70 °C Length 29 mm Width 12.4 mm Height 25 mm Content 1 pc(s) Description PCB relay with positively guided contacts according to EN 50205: 2002 Type B with 2 changeover contacts (According to EN50205: 2002 as positively driven contacts may only BE USED AS OPEN contact and 11-12 and 21-24 or 21-22 and 11-14 closed contact. Separate arrangement of neighboring contacts. Coils for DC "Protective separation between coil and contact set according to VDE 0106, EN 50178, EN 50178, EN 60204 and EN 60335th Positive guidance is given if the contacts (in a contact record) are mechanically connected together so that is not always opening and closing, and can be closed simultaneously. Thereby, it must be ensured that contact separations of 0.5 mm are available over the entire life-span, even in the faulty state. Contact material selection: AgNi - in case of ohmic or light inductive load. AgNiAu (hard gold-plated) - in case of contact currents |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
