SW2 Hiquel Threshold relay Hiquel SW2
| |
|
| Producent | Hiquel | | Part Number | SW2 (SW2) |
| Specifications | Threshold relay Hiquel SW2 |
| Unit Price | 41,98 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Threshold relay Technical data Type SW2 Operating voltage 24 V/AC/DC Nominal voltage 24 Vdc Nominal current 25 mA Type SW2 T 60 mm Content 1 pc(s) Width 12 mm Height 60 mm Description SW1/SW2 are used to control generators, pumps, fans, burners, etc. The threshold relay can be controlled with an analogue signal 0 - 10 V/DC. In the Auto mode, if the input voltage reaches the threshold the relay will pick up. When the input voltage falls below the switching threshold, the relay will drop off. The three-way switch is used to select 2 modes. Position 1: The output relay is controlled by terminals A1 - A2 (service mode). Position Auto: The output relay is under threshold control from terminals YR. The operating voltage should be continuously present on terminal A. Position 0: the relay is switched off, the input signals on terminals A1 or YR are ignored. Output 1 changeover contact, LED display for output relay. Terminals 2.5 mm², |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
