72003 Hydraelectric Hydraelectric Solenoid Valve 72003, 2 port , NC, 12 V dc, 1/2in
| |
|
| Producent | Hydraelectric | | Part Number | 72003 (72003) |
| Specifications | Hydraelectric Solenoid Valve 72003, 2 port , NC, 12 V dc, 1/2in |
| Unit Price | 17,52 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Body MaterialPolyamide Connection1/2 in BSP Connection GenderMale Connection Size1/2in Default Valve PositionNC Maximum Operating Temperature+60°C Maximum Working Pressure10bar Number of Ports2 OperationDirect Suitable ApplicationsWater Supply Voltage12 V dc Thread Standard or Connection TypeBSP Type2/2 Product Details Two-way Solenoid Valves • Diaphragm operated, normally closed solenoid valves for controlling water at a minimum pressure of 0.2 bar.• Coil can be located in any one of eight positions.• Maximum flow rate: 17 litres per minute.• 0.2 bar to10-bar pressure range.• Power consumption: 4 W.• Nylon 6 body with 1/2 in. BSP ports (can be base mounted).• 1/4 in. Spade coil terminals. Note The valve is continuously rated when the fluid temperature is below 25°C, the ambient temperature is below 60°C and the flow rate is above 5 litres/min. A duty cycle of 40% is required for fluid temperatures up to 90°C (three minutes maximum ’on’ time). • In the 12Vdc/24 Vac version, the solenoid coil is wound so either voltage can be passed through it. Two Way Inert Gases and Fluid Valves Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
