|
| Producent | Jumo | | Part Number | 701530/888-22 (70153088822) |
| Specifications | PID Temperature controller Jumo di 32 Pt100, Pt1000, KTY11-6, L, J, U, T, K, E, N, S, R, B, D, C -200 up to +2495 °C 3 A |
| Unit Price | 220,98 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | PID Temperature controller Jumo di 32 Pt100, Pt1000, KTY11-6, L, J, U, T, K, E, N, S, R, B, D, C -200 up to +2495 °C 3 A relay, Transistor (L x W x H) 112.5 x 48 x 24 mm Technical data Signal input: programmable (set +200 to +850 °C Pt100)Thermocouple: type L, J, U, T, K, E, N, S, R, B, D, CResistance thermometer: Pt100, Pt1000, KTY11-6 remote resistance sensor, Potentiometer 0 - 4 kV; current: 0 - 20 mA, 4 - 20 mA; voltage: 0 - 10 V, 2 - 10 VBinary input: via potential-free contact: for type di 32 alternative to output 2 configurable; for type di 08 standardOutput 1: relay (normally open contact) 230 V/3 A; Configurable behaviour in the event of sensor failure; Output 2: for type di 32, 0/5V logic output also configurable as alternative to binary input; For type di 08 relay (normally open contact) and parallel logic output 0/5 VInstallation case: Complies with DIN 43 700. Category Temperature controller Type di 32 Thermostat type PID Operating voltage 24 Vdc, 48 Vdc Min. temperature reading -200 °C Reading range -200 up to +2495 °C Max. temperature reading +2495 °C Outputs (thermostats) 3 A relay, Transistor No. of transistor outputs 1 No. of relay outputs 1 Recess depth 100 mm Assembly dimensions 45 x 22,2 mm Height 24 mm Length 112.5 mm Width 48 mm Sensor type Pt100, Pt1000, KTY11-6, L, J, U, T, K, E, N, S, R, B, D, C Mounting type Recess-mount Manufacturer part No. 701530/888-22 Sensor type Pt 100, Pt 1000, KTY 11-6, thermocouple type L, J, U, T, K, E, N, S, R, B, D, C Protection type IP65 (on front)/IP20 (on back) Description The single-channel digital display with bezel sizes of 48 x 24 mm (di 32) and 96 x 48 mm (di 08) allow you to display readings and the monitor threshold values in industrial applications. The configurable analogue input allows for the direct connection of thermocouples, resistance thermometers, remote resistance sensors, potentiometers or measurement value sensors with a standard signal. The sampling rate for the measurement input is 4 measurements per second. Depending on the model, the device has an easy-to-read 10 mm high (JUMO di 32) or 20mm high (JUMO di 08), 4-digit LED display for showing readings and dialogue management. J Configuration possible using just three buttons. Parameter configuration is designed to be dynamic. Input is automatically accepted after two seconds of inactivity. The degree of protection is IP66 at the front, IP20 at the rear. Electrical connection via a pluggable screw-terminal strip. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
