M173 Kemo Kemo M173 Soil Moisture Humidity Sensor Relay Switch Module
| |
|
| Producent | Kemo | | Part Number | M173 (M173) |
| Specifications | Kemo M173 Soil Moisture Humidity Sensor Relay Switch Module |
| Unit Price | 31,48 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Kemo M173 Soil Moisture Humidity Sensor Relay Switch Module Technical data Operating voltage 12 Vdc Current consumption 130 mA Version Component Length 70 mm Category Soil moisture controller Height 28 mm Width 50 mm Operating voltage 12 Vdc Description This watering regulator measures the floor moisture and switches-on during drying e.g. a magnet ventile for water supply. The switching wave is set without stages. The measuring button of watering regulator is grounded deep in earth, where the measurement should be connected to regulator via cable. It is delivered with approx. 2 m cable, the sensor cable can be expanded with normal 2-pin cable up to 20m. The equipment is operated via usual socket network (12 V/DC 130 mA, sound socket 3,5 mm) If the garden is watered only on certain days or a particular time of day,then kindly use a timer for the socket network and program it accordingly. if the flooring moisture sensor receives current from network, it starts working. Functions run-time: The moisture of flooring is measured after switching the operating voltage. If the ground is too dry, then for 25 - 30 Minthe connected pump / magnetic valve is switched on. If the ground is adequately wet, the device takes for ~ 25 - 30Mina "break" and then measures again. It then goes in an endless loop for so long till the operating voltage is switched off. Features 3 LEDs with functions display: On, Off and Pause. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
