|
| Producent | Megger | | Part Number | MIT310 (MIT310) |
| Specifications | Megger MIT310, Insulation Tester 999mΩ CAT III 600 V 1000V dc 1mA RS Calibration |
| Unit Price | 674,39 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Battery Life5000 5-Second Tests Battery TypeAA CalibratedRSCAL Dimensions203 x 148 x 78mm Display TypeLCD Height78mm Length203mm Maximum Insulation Resistance Measurement999mΩ Maximum Operating Temperature+60°C Maximum Test Voltage1000V dc Minimum Operating Temperature-10°C Minimum Test Voltage250V dc Model Number pMIT310 Plug TypeType A - North American/Japanese 2-blade, Type F - Schuko plug, Type G - British 3-pin, Type I - Australian plug, Type J - Swiss 3-pin Power SourceBattery Safety CategoryCAT III 600 V Safety Category LevelCAT III Safety Category Voltage600V Test Current1mA Tester TypeInsulation & Continuity Tester Weight980g Width148mm Product Details MIT 300 Series Insulation & Continuity Testers A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing.20mm LCD display with true analogue responseTough rubber armoured case with self contained display cover that locks away underneath the instrument during useDesigned to hang comfortably around the neck for hands-free, or for bench useAutomatic 200mA fast continuity test on connection to the circuitLead resistance nulling on continuity allows for use of fused test probesAutomatic discharge of circuit under testSafety input terminal interlock - prevents unsafe connection of test leadsIntelligent Safety System - even if connected to a live circuit whilst on continuity setting the tester will remain safe and undamagedLive voltage warning alerts the operator when a circuit voltage over 25V exists when insulation testingSafety lockout prevents the test from operating when the circuit voltage is > 50VContinuity check - prevents a continuity test or buzzer test on a live circuit3 phase safe - will not be damaged if connected across phasesLocking test buttonMeets the requirement of BS EN 61010-1 for safe connection to a 440V Installation Category III supply (600V Phase to Earth)IP54 MIT310AMoving coil displayMIT320 benefits from the following additional features: Backlit display and range selection ideal for low light environmentSelectable insulation alarm limit for fast go - no go testingSelectable continuity alarm limit for fast go - no go testingResistance measurement range to 1 MΩSP3 switched probe supplied for one handed operationSP1000 illuminated switched probe with ultra-bright LED light available separately Model MIT300 MIT310 MIT310A MIT320 Insulation ranges 250V Yes Yes Yes Yes 500V Yes Yes Yes Yes 1000V - Yes Yes Yes Measuring range 10kΩ to 999MΩ 10kΩ to 999MΩ 10kΩ to 999MΩ 10kΩ to 999MΩ Short Circuit Current 1.5mA nominal 1.5mA nominal 1.5mA nominal 1.5mA nominal Test Current on Load@ min pass values of insulation (BS7671, HD384 & IEC364) 1mA 1mA 1mA 1mA Accuracy (@ 20°C) ±3%, ±2 digits ±3%, ±2 digits ±2.5% of scale length ±3%, ±2 digits Insulation Limit Alarm 10kΩ to 1GΩ 10kΩ to 1GΩ 10kΩ to 1GΩ 10kΩ to 1GΩ Continuity Measuring Range 0.01Ω to 99.9Ω 0.01Ω to 99.9Ω 0Ω to 50Ω 0.01Ω to 99.9Ω Open Circuit Voltage 5V ±1V 5V ±1V 5V ±1V 5V ±1V Short Circuit Current 205 mA ±5mA 205 mA ±5mA 205 mA ±5mA 205 mA ±5mA Zero Offset Adjust 0 to 9Ω 0 to 9Ω 0 to 0.5Ω 0 to 9Ω Buzzer Operates @ 1 Ω to 20Ω adj. Buzzer Response time Resistance (MIT320) Measuring Range - - - 10Ω to 1MΩ Open Circuit Voltage - - - 5V Short Circuit Current - - - 200μA Accuracy @ 20°C - - - ±3%, ±2 digits up to 100kΩ Voltage Measuring Range 0 to 600 Vac (50//60 Hz) or dc 0 to 600 Vac (50//60 Hz) or dc 0 to 600 Vac (50//60 Hz) or dc 0 to 600 Vac (50//60 Hz) or dc Accuracy @ 20°C dc or ac (50//60 Hz)±1% ±2 digits dc or ac (50//60 Hz)±1% ±2 digits ±2.5% of scale length for 50//60 Hz dc or ac (50//60 Hz)±1% ±2 digits Selection Guide MIT300 MIT310 MIT310A MIT320 Resistance ● Voltage warning ● Default voltmeter ● ● ● Back-lit display ● Back-lit selector ● Auto power down ● ● ● Switched test probe ● Note RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty Supplied with instructions, 2 wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap & carry case. Megger Insulation & Continuity Testers |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
