DSPIC30F2010-20E/MM MICROCHIP DSPIC30F2010-20E/MM 16bit dsPIC Microcontroller, 20MHz, 12 kB Flash, 512 B RAM, 28-pin QFN
| |
|
| Producent | MICROCHIP | | Part Number | DSPIC30F2010-20E/MM (DSPIC30F201020EMM) |
| Specifications | DSPIC30F2010-20E/MM 16bit dsPIC Microcontroller, 20MHz, 12 kB Flash, 512 B RAM, 28-pin QFN |
| Unit Price | 4,04 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | ADC Channels6 ADC Resolution10bit ADCs1 (6 x 10 bit) Data Bus Width16bit Device CoredsPIC Dimensions6 x 6 x 0.95mm Family NamedsPIC30 Height0.95mm Instruction Set ArchitectureRISC Length6mm Maximum Frequency20MHz Maximum Operating Temperature+125 °C Minimum Operating Temperature-40 °C Mounting TypeSurface Mount Number of ADC Units1 Number of CAN Channels0 Number of Ethernet Channels0 Number of I2C Channels1 Number of LIN Channels0 Number of PCI Channels0 Number of PWM Units2 Number of SPI Channels1 Number of Timers3 Number of UART Channels1 Number of USART Channels0 Package TypeQFN Pin Count28 Program Memory Size12 kB Program Memory TypeFlash Pulse Width Modulation2 (6 x 16 bit) PWM Channels6 PWM Resolution16bit RAM Size512 B Timer Resolution16bit Timers3 x 16 bit Typical Operating Supply Voltage3 → 5.5 V USB Channels0 Width6mm Product Details dsPIC30F Digital Signal Controller The dsPIC30F Digital Signal Controllers offer the performance of a DSP with the simplicity of an MCU. The dsPIC30F is best suited for applications that benefit from a wide operating voltage (2.5 to 5.5V), extremely low standby current, integrated EEPROM and for designers that prefer 5V operation due to systems considerations. The 30MIPS dsPIC30F variants integrate SMPS peripherals, motor control peripherals and a Codec interface that enable efficient digital power converters, advanced motor control algorithms and speech and audio applications. Small package DSCs with high performance ADC are well suited for smart sensing applications. dsPIC Digital Signal Controllers dsPIC Digital Signal Controllers have the same basic internal architecture and instruction set as the 16-bit PIC24 microcontroller family, but with the addition of extra DSP hardware and related instructions. dsPIC features low interrupt latency: fast response to real-time eventsMost instructions require only a single clock cycle to executeSingle-cycle 16 x 16 multiply instructionDivide instructionDSP engine with 40-bit accumulatorsREPEAT and DO loop hardware for zero-overhead program loopsInstruction set optimised for C compilersFlexible high-speed and low-power integrated oscillators with PLL eliminates need for external crystalPower-on Reset and fail-safe clock monitor |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
