POE125U-4AT-N-R Phihong Phihong PoE Injector
| |
|
| Producent | Phihong | | Part Number | POE125U-4AT-N-R (POE125U4ATNR) |
| Specifications | Phihong PoE Injector |
| Unit Price | 328,39 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Efficiency75% Injector TypeMid-Span Input AC Connector TypeIEC 320 C14 Length200mm Maximum Temperature+40°C Minimum Temperature0°C Mounting StyleRack Mount Number of Ethernet Ports4 Product Type4 Port PoE Protection TypeOver Current, Over Voltage, Short Circuit Response Time10ms SeriesPOE125U Standards MetCE, cULus Supported Ethernet StandardsIEEE802.3at Weight1.4kg Width224.9mm Product Details 125W, 4-Port PoE Midspan Injector 4-port Power-over-Ethernet Midspan Injector injects power into ethernet cables to supply power and data to a PoE enabled devicesFully compliant to IEEE802.3at standard125W power supply providing full power of 33.6W to all four ports - No power management requiredSupports full power mode of Cisco AP1250Diagnostic LEDsOver temperature, over voltage/current and short circuit protectionOutput voltage protectionGigabit compatible (10/100/1000 base-T)Fully regulated outputRJ45 Data In and Data/Power Out socketsHarmonic current compliance to EN 61000-3-2EMI compliance to EN 55022 Class B and FCC Class BUNH IOL tested3-pin IEC320 C14 mains input socket Note For Industrial Use Only, not in scope of Regulation (EC) No 125/2009 Approvals cUL/UL Standards EN60950-1:2001 Phihong Midspan Injectors & Splitters Spare Pair and Data Pair powering - ULTRA Power midspans stk nos. 666-8211 (POE60U single-port) and 666-8220 (POE80U single-port), have a combination of Spare Pair and Data Pair powering over the full 8 wires. There are no specific IEEE standards for these yet. The midspans are compliant to the performance of 10baseT, 100baseT and 1000baseT (Gigabit). They have safety features, such as handshake detection, overload, connect and disconnect functionality as for the IEEE802.3af and IEEE802.3at standards but the handshake detection resistance is 12.5KΩ, instead of 25KΩ for the IEEE802.3af and IEEE802.3at standards |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
