09-27562 Rs 09-27562, Single Sided DIN 41612 Matrix Board FR2 with 1.02mm Holes 2.54 x 2.54mm Pitch
| |
|
| Producent | Rs | | Part Number | 09-27562 (0927562) |
| Specifications | 09-27562, Single Sided DIN 41612 Matrix Board FR2 with 1.02mm Holes 2.54 x 2.54mm Pitch |
| Unit Price | 13,22 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Base MaterialSynthetic Resin Bonded Paper ConnectionDIN 41612 Copper Thickness35µm FR Material GradeFR2 Hole Diameter1.02mm Hole Pitch2.54 x 2.54mm Length220mm Number of Sides1 Width100mm Product Details Economic Eurocard The economical development board, designed for wire-to-wire connection of discreet components.This board is very well suited to applications where there is a large number of common buses or signal lines.Thanks to the APW cutter (stock number 543-535) used to cut tracks upon request, circuit production is very fast. RS, Professionally Approved Products, gives you professional quality parts across all product categories. Our range has been testified by engineers as giving comparable quality to that of the leading brands without paying a premium price. Compatible with DIN 41494 (KM6-II) Matrix (mm): 2.54 x 2.54 Material: SRBP Thickness of copper: 35 μm Hole diameter: 1.02 mm DIN Type Stripboards Suitable for use with the KM6-II eurocard sub-rack systems The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end. The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard. Note Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
