10-2449 Vero Technologies 10-2449, Single-Sided Stripboard Epoxy Glass 160 x 100 x 1.6mm DIN 41612 FR4
| |
|
| Producent | Vero Technologies | | Part Number | 10-2449 (102449) |
| Specifications | 10-2449, Single-Sided Stripboard Epoxy Glass 160 x 100 x 1.6mm DIN 41612 FR4 |
| Unit Price | 22,60 EUR |
| Minimum Order Quantity | 1 |
| Tariff No. | |
| Lead Time | |
| Weight and Dimension | |
| Description | Base MaterialEpoxy Glass Fabric Laminate ConnectionDIN 41612 Dimensions160 x 100 x 1.6mm FR Material GradeFR4 Hole Diameter1.02 mm, 3.81 mm Hole Pitch2.54 x 2.54mm Length160mm Number of Sides1 Thickness1.6mm Width100mm Product Details KM6 Veroboard® boards for DIN 41612 connectors Single-sided boards combining the advantages of Veroboard, the flexibility of Eurocards and DIN 41612 connectors.For wiring by wrapping applications, spacing of 3.81 on the double height boards keeps the board route aligned on the grid of the adjacent connectors.Silk-screened component installation grid.The cutter (stock number 543-535) allows rapid completion of a circuit by interrupting the copper tracks on request. RS, Professionally Approved Products, gives you professional quality parts across all product categories. Our range has been testified by engineers as giving comparable quality to that of the leading brands without paying a premium price. DIN 41494 compatible Matrix (mm): 2.54 x 2.54 Hole diameter: 1.02 mm Material: Epoxy glass Stock dimensions (mm) number number of holes no. Length width of tracks per track 434-627 160 100 34 52 100-4514 220 100 34 77 100-4182 160 100 34 54 DIN Type Stripboards Suitable for use with the KM6-II eurocard sub-rack systems The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end. The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard. Note Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card. |
| Datasheets | |
E-shop Coming Soon
 | |
E-shop Coming Soon
| |
Related Parts
| |
|
